Monday, November 24, 2008

How to Jailbreak Your 2.2.0 3G iPhone (Mac)

This tutorial will show you how to jailbreak your 3G iPhone. It has been updated for the 2.2 firmware and the inclusion of the Installer.app beta.

Step One
Make a folder called "Pwnage" on the desktop. In it, you will need a couple of things. Pwnage 2.2, found here or here

You will also need the 2.2 iPhone firmware.
2.2.0 (3G): iPhone1,2_2.2_5G77_Restore.ipsw

When downloading the IPSW file, it is best to download it with Firefox!


Step Two
Double click to mount PwnageTool 2.2 then drag the PwnageTool icon into the Pwnage folder.


Then from the Pwnage folder double click to launch the PwnageTool application.


Click Ok if presented with a warning.


Step Three
Click to select Expert Mode from the top menu bar


Step Four
Click to select your iPhone. A check-mark will appear over the image of the phone.


Step Five
Click the blue arrow button to continue. You will be brought to the "Browse for IPSW" page. On my laptop, it automatically found the IPSW. If PwnageTool doesn't automatically find the ipsw file you can click Browse for IPSW....


Click to select the found IPSW file, a checkmark will appear next to it. Then click the blue arrow button to continue.


Step Six
You will then be brought to a menu with 7 choices. Click to select General then click the blue arrow button.


The General settings allows you to decide the partition size. Click activate the phone and Disable partition wipe-out. Click the blue arrow button.

NOTE*: Deselect Activate if you have an iPhone legitimately activated on an official carrier.
NOTE*: You may need to increase the size of the root partition slightly. My first attempt failed at creating the IPSW until I increased the size to about 695 MB.


The Bootneuter settings are greyed out for the3G iPhone. Hopefully this will be enabled soon! Click the blue arrow button.


The Cydia settings menu allows you to create custom packages so you do not have to manually install the necessary them later.


Click to select the Download packages tab. Then click the Refresh button to display all the available packages. Double clicking the package you want will download it and make it available in the Select Packages tab.


Checkmark the ones you want then Click the blue arrow button.


The Custom Packages Settings menu displays listed package settings for your custom IPSW. For know leave these settings as is. Click the blue arrow button to continue.


The Custom Logos Settings menu allows you to add your own images as boot logos. Click the Browse button to select your Boot logo and Recovery logo.


Remember the rules for them: RGB or Grayscale format with Alpha channel and dimension bellow 320x480...


Click the blue arrow button to continue.

Step Seven
You are now ready to begin the pwnage process! Click the Build button to select it then click the Blue arrow button to begin.


Step Eight
You will be asked to save your custom .ipsw file. Save it to your Pwnage folder you created on your Desktop.


Your IPSW is not being built. Please allow up to 10 minutes.


You will be asked to enter your administrator password. Do this then click the OK button.

When prompted if your iPhone has been Pwned before, we clicked No. It allows for a more thorough restore.


You will be asked to turn off the device. Make sure it is connected to the USB port.


Step Nine
Be ready to follow directions now. It will ask you to hold the home button and the power button for 10 seconds. Then, you will have to release the power button and hold the home button for 10 seconds to enter DFU.


If you fail, it will show you a message. Click Yes. Unplug the iPhone from the USB. Turn it off, then turn it back on. Plug it back into the USB and turn off the iPhone when prompted.

When done correctly, Pwnage 2.2 will display a message telling your that it successfully entered DFU mode. iTunes will also pop-up.


IMPORTANT***: The ‘late 2008’ MacBook/air/pro line of computers have an issue with DFU mode, it is possible to go from Pwned 2.1 -> 2.2 but going from stock to Pwned does not work, if in any doubt use a different machine. Meaning, if you have a late 2008 model MacBook and have not pwned you will have to use a different computer until we post a solution. If you have a late 2008 model MacBook and HAVE pwned then you can simply put the iPhone into recovery mode and restore with the newly created IPSW. You can find instructions on how to put the iPhone into recovery mode here

Step Ten
In iTunes, hold the Alt/Option button and click Restore.


Step Eleven
Navigate to the Pwnage folder on your desktop using the dialog window that appears. Select the custom IPSW that was created (iPhone1,2_2.2_5G77_Custom_Restore.ipsw) and click the Open button.


Step Twelve
iTunes will now restore the firmware on your iPhone. This can also take up to 10 minutes.


If you so desire you may restore from a previous backup to keep all your settings or set your iPhone up fresh.


Step Thirteen
Once the restore is completed your iPhone will reboot and you will notice Cydia is present on the SpringBoard!

9 comments:

Carl said...

What version of iTunes do you need?

Also, I presume that this won't allow any sim card to work in the iPhone and that it's not been unlocked yet?

Regards in Advance!

Metsfan said...

when i download the 2.1 software (got ipod on 2.2) i get no .ispw file I get a bunch of weird ones

Anyone have a specific link where i can get the right file?

faheem said...

i bought my mac in 2007 do u think it would create any problems???
and after i do all this will i be able tu use my iphone properly and put apps on it??

Metsfan said...

You still have full access to the app store and all of apples products.... and you also have cydia and installer. (Free apps)

george n said...

I have tried to jailbreak a 3G iphone on my iMac using the Pwnage tool 2.2 At the very last stage of the jailbreaking process and when i tried to restore the custom made .ipsw on the iphone i get an error while iTunes is extracting the file in order to restore the iPhone. Any ideas how to deal with this?

TCPMeta said...

I've tried this a few times and I keep getting errors 21 and 2006.

I'm using a iPhone 3g 8GB and iTunes 8.0.2 and PwnageTool 2.2 and 2.2.1

marisol said...

I recently came across your blog and have been reading along. I thought I would leave my first comment. I don't know what to say except that I have enjoyed reading. Nice blog. I will keep visiting this blog very often.


Betty

http://desktopmemory.info

Ian said...
This comment has been removed by the author.
Ian said...

can I restore my iPhone if i don't want it jailbroken anymore?