iBooter Improves on iPhuc Capabilities

iBooter is an interactive console for iBoot (the apple bootloader). Most of you would have used iphuc, which uses iBoot. However, it's dependant on iTunes the mobile device library and can't get replies from iBoot, which results in one way communication, where you blindly say cmd setenv foo, but you never know what happened.

With iBooter you can debug phone booting issues as well as run it in Linux/MacOS/Windows without iTunes installed. You can use iBooter to read memory/write memory, load ramdisks, change your wifi mac address, read files from nand and much more!

command list:
help this list
script run script at specific address
go jump directly to address
bootx boot a kernel cache at specified address
diags boot into diagnostics (if present)
tsys boot into tsys (if present)
bdev block device commands
image flash image inspection
fs file system commands
fsboot try to boot kernel at /kernelcache
devicetree create a device tree from the specified address
ramdisk create a ramdisk from the specified address
halt halt the system (good for JTAG)
reboot reboot the device
poweroff power off the device
md memory display - 32bit
mdh memory display - 16bit
mdb memory display - 8bit
mw memory write - 32bit
mwh memory write - 16bit
mwb memory write - 8bit
mws memory write - string
crc POSIX 1003.2 checksum of memory
printenv print one or all environment variables
setenv set an environment variable
clearenv clear all environment variables
saveenv save current environment to flash
run use contents of environment var as script
bgcolor set the display background color
setpicture set the image on the display
iic iic read/write
radio Manipulate the radio board.
setbusclock Set bus clock to the given frequency in Hz.
setcorevoltage Set core voltage to the given voltage in mV.
syscfg flash SysCfg inspection
charge Manage the charger chip.
powernvram Access Power NVRAM.
usb run a USB command
chunk chunk a file